Custom neon signs for business built for daily commercial duty — storefronts, hospitality, offices, salons and multi-site franchises. 8 mm acrylic, CNC-carved groove, SMD 2835 LED and a silicone diffuser, produced to one locked drawing so every location matches, with MOQ 1 and 3–7 day production.
Neon signs for business are custom illuminated signs built for daily commercial use — a storefront name, a logo above a reception desk, a menu or message board in a restaurant, or an identical sign rolled out across a franchise. Unlike consumer bedroom signs, a business sign must run for years, survive cleaning, keep its colour consistent between locations, and comply with commercial electrical and safety rules. This page is written for the people who buy them: business owners, store managers, franchise operators, sign shops and procurement teams.

| Parameter | Specification |
|---|---|
| Panel material | 8 mm cast PMMA acrylic |
| Construction | CNC-carved groove + seated LED strip |
| LED type | SMD 2835, 3000–6500 K |
| Diffuser / seal | Silicone strip (diffuses + seals) |
| Working voltage | AC 110-220 V input (Class 2 driver) · 12 V / 24 V DC output |
| Dimming | Trailing-edge / RF / app (optional) |
| Waterproofing | IP44 standard, IP65 for outdoor |
| Lifespan | 50,000+ hours (LM-80 rated LED) |
| Colour options | Single / CCT / RGB / RGBW / RGBIC |
| Certification | CE, RoHS, UL-listed components |
| MOQ | 1 piece |
| Production | 3–7 days (5–100 sets 7–14 days, 100+ sets 14–30 days) |
| Warranty | 2 years |

The construction is the same regardless of where the sign hangs: an 8 mm cast acrylic panel with a CNC-carved groove, a seated SMD 2835 LED strip, and a silicone diffuser that evens the light and seals the channel. Because the panel is rigid and the groove is machined to the artwork, a reordered sign matches the original exactly — the property a franchise rollout depends on.

Multi-site brands fail when store number ten looks different from store number one. We control that with a single master artwork file, a locked LED chip and colour temperature, a documented build sequence and the same QC gate on every unit — so a customer walking into any location sees the identical sign.

Legibility drives size. A counter sign viewed from three feet can use 8–14 inch text, while a storefront seen from the street needs 24–48 inches. We work from your artwork and the viewing distance to recommend a size, then confirm brightness and mounting before production.
| Viewing distance | Typical text height | Common location |
|---|---|---|
| 3–6 ft | 8–14 in | Counter, shelf, reception |
| 6–15 ft | 14–24 in | Storefront window |
| 15–40 ft | 24–48 in | Storefront, lobby |
| 40+ ft | 48 in + | Roadside, building facade |

A commercial buyer should compare the five-year cost, not the unit price. Glass neon is cheaper to hand-bend but burns more power, needs transformer service, and breaks in transit; LED neon costs more up front and then just runs. Over a five-year life the LED sign is usually the cheaper asset to own.
| Cost driver (5-year) | Glass neon | LED neon (this product) |
|---|---|---|
| Energy | High-voltage transformer, constant draw | Low-voltage DC, ~80% less |
| Maintenance | Tube + transformer service | LED rated 50,000+ h, minimal |
| Fragility / transit | Glass, high breakage | Acrylic panel, robust |
| Replacement | Whole tube sections | Board-level repair or re-make |
Brightness is set at the LED strip and tuned with a driver that dims cleanly without flicker — important in hospitality where the sign dims for evening service and for any space filmed on camera. Dimming options include trailing-edge wall dimmers, RF remotes and app control for RGB and RGBW setups.
Every business sign ships with the fixings and a drill template for the mounting method you choose: flush wall-mount with standoffs, suspended with aircraft cable for a lobby or window, or a recessed channel for a seamless look. The sealed acrylic surface is cleanable with a soft cloth, which matters in kitchens, salons and gyms.

Commercial installations face rules that a bedroom sign never does. The sign is built with CE- and RoHS-compliant components, a UL-listed driver and a Class 2 low-voltage output, which simplifies most electrical sign-offs. Local sign permits and landlord approvals are the buyer’s responsibility, but we supply the electrical data and mounting details your authority or landlord asks for.
| Failure mode | Cause | Prevention |
|---|---|---|
| Dim or dead section | LED strip fault or poor connection | SMD 2835 strip, soldered joins, 24-hr burn-in |
| Driver failure | Undersized / overheating | UL-listed driver with 20% headroom |
| Colour shift over time | Cheap LED bin | Locked chip + CCT per SKU |
| Water ingress (outdoor) | Failed seal | IP65 silicone seal, gasketed entry |
| Flicker on camera | Non-flicker-free driver | Flicker-free constant-voltage driver |
Signs are built with CE- and RoHS-compliant components and UL-listed power supplies. Electric signs fall under UL 48; the RoHS Directive restricts hazardous substances, and the CE marking declares conformity for the EU market.
Because a custom neon sign is built one at a time, the minimum order is 1 piece — a single sign for a single location, or a full rollout, both run on the same production line. Pricing is driven by size, colour tier and dimming.
| Quantity | Pricing | Typical lead time |
|---|---|---|
| 1 piece | Single-unit price | 3–7 days |
| 5–100 sets | Tiered | 7–14 days |
| 100+ sets | Wholesale / OEM | 14–30 days |
Every sign is CNC-routed from your approved artwork, assembled, tested through a 24-hour burn-in and a luminance check, then packed in a rigid carton (plywood crate for export) so it arrives flat and unmarked. A digital proof is confirmed before production — no surprises on delivery.
Office neon signs — a company name or logo for the reception, lobby or meeting room.
Reception and lobby signs make a first impression with a brand wordmark behind the front desk.
Corporate and commercial neon signs match brand colours and reproduce the logo exactly.
The minimum order is 1 piece. A custom neon sign is built one at a time, so a single sign for one location and a multi-site rollout run on the same production line.
A single piece ships in 3-7 days, 5-100 sets in 7-14 days, and 100+ sets in 14-30 days. A digital proof is confirmed before production starts.
Yes. They are built on an 8 mm acrylic panel with an SMD 2835 LED and a UL-listed driver, with a silicone-diffused, wipe-clean surface and a 2-year warranty.
Yes. We work from one locked master artwork with a fixed LED chip and colour temperature, so every store receives an identical sign.
Vector files are best (AI, PDF, SVG, DXF), but we can also work from a clear high-resolution image and rebuild it as a production drawing.
The sign ships with CE/RoHS-compliant components and a Class 2 low-voltage output. We supply the electrical data and mounting details your landlord or local authority requests; permits remain your responsibility.
Whether you need a single storefront sign, a multi-site brand rollout, or an OEM and wholesale partner, we are ready to support your business.